User guide

24
Inter-Tel
®
Model 8690 Endpoint User Guide
GETTING
STARTED
VLAN PORTS
If your endpoint resides on a Virtual Local Area Network (VLAN), your network
administrator may instruct you to program the VLAN ID for the ports.
To configure VLAN IDs for the ports:
1. Tap Start - Settings - Control Panel.
2. Double-tap Network and Dial-up Connections.
3. Double-tap AUMAC1. The 'AU1x00 Ethernet Controller' Settings dialog box
appears.
4. Select the VLAN tab.
5. Select the VLAN ID number (supplied by your network administrator) for the
Phone Port and the Downlink Ports using the associated scroll buttons, and then
tap
OK.
6. Save the registry (see page 13).
NOTE
Do not configure the VLAN ID for your endpoint unless instructed to do so
by your network administrator.