Operation Manual



- 17 -
If the calibration was successful "KALIBR OK! SPEICH / CALI OK!
SAVE" will appear. If the calibration was unsuccessful "KALIBR.
FEHLER / CALI FAILED" will appear. In this case please repeat the
calibration process.
"KALIBR. GEHEN / CALI FOR WALKING" will now appear on the
display. Complete the calibration for walking in the same way as the
calibration for running.
The calibration can be aborted by pressing MODE.
Exit setting mode by pressing MODE.
Odometer (GESAMT-DIST/ODOMETER)
The bottom row of the display will show the total covered distance. The
value can be reset by pressing and holding SET.
Pedometer (SCHRITTE/STEP)
The bottom row of the display will show the step count. The value can
be reset by pressing and holding SET.
Calories, fat burn and BMI (KALORIEN/CALORIE)
The lower row will show the burned calories (KALORIEN/CALORIE).
Press SET to switch to the display of fat burn in gram (FETT/FAT
BURN) or to the display of your BMI (Body Mass Index).
In the display for calorie burn or fat burn the values can be reset by
pressing and holding SET.
Note: To increase the accuracy of the calorie and fat burn displays your
age and weight must be set correctly.
Note: The counter for fat burn is only activated while your heart rate is
above 120 beats per minute.