Operation Manual



- 9 -
Alarm (ALARM)
Press and hold SET for 3 seconds to enter setting mode.
EINSTELLEN/HOLD TO SET will appear on the display and the
minutes of the alarm time will blink.
Press SEL to set the minutes and press SET to confirm your setting.
Set the hours in the same way.
You may optionally set the month and day as well.
If neither month nor day are set the alarm will sound daily. If the day is
set, the alarm will sound monthly. If both the month and the day are set
the alarm will sound only at the set date.
The hourly chime setting will now appear on the display
(STDALARM/CHIME).
Press SEL to select the setting and confirm your selection by pressing
SET. (EIN/ON=on, AUS/OFF=off).
If the chime is activated, the bell symbol will appear and the watch will
chime at the beginning of every hour.
Exit setting mode by pressing MODE.The alarm can be activated or
deactivated by pressing SET. If the alarm is activated the alarm symbol
•)) will appear.
When the alarm sounds, press SET, SEL or MODE to stop the alarm.