Operation Manual Stereo Tuner TU-6200 *Rack mount products in the Western Hemisphere (North America, South America, and the Caribbean) do not have handles installed due to customer preference.
STEREO TUNER Welcome A personal welcome to you from the management and employees of Inter-M All of the co-workers here at Inter-M are dedicated to providing excellent products with inherently good value, and we are delighted you have purchased one of our products. We sincerely trust this product will provide years of satisfactory service, but if anything is not to your complete satisfaction, we will endeavor to make things right.
STEREO TUNER Contents Unpacking .......................................................................................................................................2 Installation Environment....................................................................................................................................2 Important Safety Instructions.............................................................................................................2 Features ..................................
STEREO TUNER Unpacking Although your TU-6200 is neither complicated nor difficult to operate, we recommend you take a few minutes to read this brief manual and familiarize yourself with the important information regarding product features, setup and operation. As with most electronic devices, we strongly recommend you to retain the original packaging. In the unlikely event the product must be returned for servicing, the original packaging (or reasonable equivalent) is required.
STEREO TUNER Features - Memory of 40 FM/AM frequencies 40 broadcasting frequencies can be memorized. - Auto Scan Broadcast station can be selected automatically with automatic seek function. - AMX, CRESTRON INTERFACE It supports the control port to integrate with the remote control device such as AMX and CRESTRON control systems for the user assignments. Additional Explanations - AMX, CRESTRON INTERFACE It is the terminal which is connected with remote controllers like AMX and CRESTRON control systems.
STEREO TUNER Front Panel 1 2 3 4 5 6 7 8 1. MODE BUTTON It is used when selecting FM broadcast mode (MONO/STEREO). 2. AM/FM BUTTON It is used when selecting AM and FM broadcasting. 3. ▼/▲ (FREQUENCY DOWN/UP) BUTTON It is used when changing the frequency. 4. ◀◀/▶▶(PRESET DOWN/UP) BUTTON It is used when selecting the memorized broadcast frequency. 5. 0~9 NUMBER BUTTONS It is used when memorizes the broadcast frequency or selects the memorized frequency. 6.
STEREO TUNER Rear Panel 1 2 3 4 5 6 1. AC INPUT TERMINAL It is the terminal witch connects the power cord. 2. RS-232 INTERFACE It is the terminal which connects the remote controller such as AMX and CRESTRON control systems. 3. R-CHANNEL XLR OUTPUT It is R-channel balance audio output terminal. 4. L-CHANNEL XLR OUTPUT It is L-channel balance audio output terminal. 5. RCA OUTPUT TERMINAL It is L/R 2 channels unbalance audio output terminal. 6.
STEREO TUNER Operation Method 1. SELECT BROADCAST FREQUENCY AUTOMATICALLY AND MANUALLY 1) Push the power switch on the front panel. 2) By using ▼/▲ (frequency DOWN/UP) button, select the frequency you desire. - Automatic Seeking: push the frequency down or up button for 2 seconds, it will stop at the receivable frequency. - Manual Seeking: push the frequency down or up button shortly to select the broadcast frequency. 2.
STEREO TUNER Connecting Antenna 1. FM ANTENNA Due to its property, FM broadcast frequency will be weaker in valley, surroundings of building, reinforced building, etc. install the antenna by considering frequency strength or surrounding situations. 2. INSTALLATION OF FM ANTENNA Connect to FM antenna terminal as shown in the below figure, and decide the installation position and direction to make reception good while listening the broadcast.
STEREO TUNER Block Diagram TUNER PACK EEPROM MICOM VFD KEY -12V +12V +5V F+ +31V MUTE REG +5V POWER TRANS FUSE L 6 G TU-6200 8 X-TAL RS-232 +3.
STEREO TUNER Specifications TU-6200 FM (75kHz MOD. 1kHz) Tuning range 87.5~108.0MHz Sensitivity 6dB(Less than 10dB) T.H.D. (Mono) 0.3% (Less than 1%) S/N (mono) Output level (75kHz MOD.) 60dB (Better than 50dB) 0dB±3 dB AM (30% MOD 400Hz) Tuning range Sensitivity S/N T.H.D. Output level Operation Temperature Power source Power consumption Weight (SET) Dimensions (SET) Europe: 522~1629kHz, U.S.A: 520~1710kHz 82dB(Less than 86dB) 35dB(Better than 30dB) 1.
STEREO TUNER ※ DIMENSIONS 280 440 88 482 10 TU-6200
STEREO TUNER Service Procedures Take steps to insure the problem is not related to operator error or other products within the system. Information provided in the troubleshooting portion of this manual may help with this process. Once it is certain that the problem is related to the product contact your warranty provider as described in the warranty section of this manual. Schematic A Schematic is available by contacting your warranty provider.
NOTE
NOTE
Inter-M, Ltd. (Korea) began operations in 1983. Since then, Inter-M has grown to become one of the largest manufacturers of professional audio and commercial sound electronics equipment in the world. Inter-M has gained worldwide recognition for its own branded products, as well as private label manufacturing of electronics sold under other names (OEM).
