Specs

Insert I/O
Add compressors, EQ, or other signal-processing gear
t
o the mono channels as required via insert I/O patch
points.
Six Buses (Four Group Outputs
and Stereo)
T
he MX-36/EX features individual group buses and
outputs that can be used for convenient channel
g
rouping, in addition to the main stereo bus.
3-band Mid-sweep Channel EQ
& HPF
3-band equalizers with a sweepable mid-band on all
mono input channels.
All mono microphone input channels also feature a
switchable high-pass filter that can be used to cut out
unwanted low-frequency noise.
Two Aux Sends, One EFX SEND
& 2 Stereo Aux Return
E
ach input channel has three auxiliary sends - one
post-fader “Effect” send, one switchable for pre- or
post-fader operation, and one pre-fader send -
a
ffording plenty of flexibility for external signal
p
rocessing and monitoring. A stereo auxiliary return
is also provided.
Desktop or Rack Mountable
(only MX-1436/EX)
Use your MX-36/EX mixer on a desktop or mounted
in a rack - the rack mount brackets are provided(only
MX-1436/EX).
Phantom Power
All mono inputs of the MX-
36/EX's high-performance
mic preamps feature swit-
chable phantom power for
studio condenser microphones. A single switch turns
phantom power on or off for all mono channels.
14, 18, 22 Input Channels
S
ix mono microphone/line inputs(MX-1436/EX), ten
mono microphone/line inputs(MX-1836/EX), fourt-
een mono microphone/line inputs(MX-2236/EX) and
f
our stereo line inputs.
24 bit Digital Signal Processing &
9 Band Stereo Graphic Equalizer
(MX-1436EX, 1836EX, 2236EX)
The on board 24 bit DSP effects range from chorus,
frange, room and plate to hall and delay.
9 Band stereo graphic equalizer allows the fine
response shaping of the main output. Center
frequency is 63Hz, 125Hz, 250Hz, 500Hz, 1kHz, 2kHz,
4kHz, 8kHz and 16kHz.
Size and Features
MX-36/EX
SERIES
Stereo Mixing Console