Operation Manual HD Multiplexer & Converter HDMC-01
Welcome A personal welcome to you from the management and employees of Inter-M All of the co-workers here at Inter-M are dedicated to providing excellent products with inherently good value, and we are delighted you have purchased one of our products. We sincerely trust this product will provide years of satisfactory service, but if anything is not to your complete satisfaction, we will endeavor to make things right.
Unpacking Although your HDMC-01 is neither complicated nor difficult to operate, we recommend you take a few minutes to read this brief manual and familiarize yourself with the important information regarding product features, setup and operation. As with most electronic devices, we strongly recommend you retain the original packaging. In the unlikely event the product must be returned for servicing, the original packaging (or reasonable equivalent) is required.
CONTENTS OF PACKAGE Installation of the camera must be performed by qualified service personnel in accordance with all local and national electrical and mechanical codes. Carefully remove the color camera and its accessories from the carton and verify that they were not damaged in shipment. The content of the package includes: 1. HD SDI Converter 2. Adapter 3. Screw (4EA) 4.
CONVERTER OVERVIEW ① ② ③ ④ ⑤ ⑥ ⑦ ⑧ DC12V INPUT POWER LED (HD-SDI Signal Detector Light) HD-SDI INPUT HD-SDI OUTPUT (HD-SDI IN Looping Through Out) RS-485 PROTOCOL ID Configuration BAUD RATE / OUTPUT MODE Control HDMI OUTPUT 6
CONVERTER INSTALLATION Connection Overview HDMI Cable HD-SDI through Coaxial Cable HD-SDI DVR or HD-SDI Monitor RS-485 Starting Installation The Converter most be installed by several condition. - HD-SDI Camera / HDMI Input Monitor or TV / 75Ω BNC & HDMI Cable a. Select an appropriate location for the camera. b. Install camera to be connected (75Ω BNC Cable) to the converter. c. Install Converter to be connected( HDMI Cable) to the HD Monitor. d. Plug the dc power into the Converter DC INPUT Jake. e.
KEYBOARD CONNECTION RS-485 Connection XXXX G _ _ + G DOME2 DOME1 (G) ( + ) ( - ) RS-485 REAR KEYBOARD CONTROLLER PROTOCOL ID Setting XXXX ID 0001 0002 0003 0004 0005 0006 0007 0008 0009 0010 0011 0012 0013 0014 0015 0016 4 Up Down Up Down Up Down Up Down Up Down Up Down Up Down Up Down 3 Up Up Down Down Up Up Down Down Up Up Down Down Up Up Down Down 2 Up Up Up Up Down Down Down Down Up Up Up Up Down Down Down Down 1 Up Up Up Up Up Up Up Up Down Down Down Down Down Down Down Down 8 +
Sample: PROTOCOL ID Setting ID : 0001 1 2 3 4 ID : 0002 ID : 0003 KEYBOARD CONTROLLER ID : 0013 1 2 3 4 . . . . ID : 0016 1 2 3 4 BAUD RATE / OUTPUT MODE Setting XXXX Baud Rate 1 2 Baud Rate 40K UP UP Baud Rate 9600 DOWN DOWN * Baud Rate / Output Mode Setting Condition 1) Switch No. 1 Baud Rate Control 2) Switch No.
SPECIFICATIONS Item HDMC-01 Input signal BNC HD-CCTV /HD-SDI: SMPTE 292M, 296M Output signal BNC/HDMI HD-SDI/HDMI Input connector BNC 1 x BNC (HD-SDI) 3G 75Ω inter-locked socket BNC 1 x BNC (HD-SDI) 3G 75Ω inter-locked socket HDMI 19 pin HDMI(Digital) Output connector RS-485 Connector Camera control Fastrax, Pelco D, Pelco P, Vistar Bandwidth 3.
Service procedures Take steps to insure the problem is not related to operator error or other products within the system. Information provided in the troubleshooting portion of this manual may help with this process. Once it is certain that the problem is related to the product contact your warranty provider as described in the warranty section of this manual. Schematic A Schematic is available by contacting your warranty provider. parts List A Parts List is available by contacting your warranty provider.
MEMO
Inter-M, Ltd. (Korea) began operations in 1983. Since then, Inter-M has grown to become one of the largest manufacturers of professional audio and commercial sound electronics equipment in the world. Inter-M has gained worldwide recognition for its own branded products, as well as private label manufacturing of electronics sold under other names (OEM).
