Audio Matrix Controller PX-6216 Emergency Combination System ECS-6216MS Direct Box DIB-6000 M E M T E T S S Y SY S N I 0 MA 0 S 0 U 6 8B
Audio Matrix Controller PX-6216 The PX-6216 is the heart of the system 6000. DSP based 16 x 8 digital audio matrix is PC configured, controlled and monitored. The PX-6216 is PC controlled via Inter-Mʼs MS-6800 custom system control software. •16*8 auDIo MaTrIX - 8 channel output matrix over various audio input. (BGM 10CH, EM 1CH, TIMER 1CH, RM 4CH) •varIouS TyPE of BgM InPuT - Connection of BGM sources is possible via the 2 XLR combo jack channels, the 6 XLR channels, and 2 RCA jacks.
FRONT/REAR PANEL 1 2 1 PRESET MEMORY BUTTON AND INDICATOR 2 POWER INDICATOR 1 2 3 7 5 4 8 6 9 1 BGM INPUT TERMINAL 2 EMERGENCY AUDIO INPUT TERMINAL 3 TIMER AUDIO INPUT TERMINAL 4 REMOTE MIC COMMUNICATION TERMINAL 5 AUDIO OUTPUT TERMINAL 6 EMERGENCY PANEL (EP) CONNECTION TERMINAL 7 RS-232 SOURCE UNIT CONTROL TERMINAL 8 DATA LINK IN/OUT TERMINAL 9 POWER INPUT TERMINAL SPECIFICATIONS Rated Output Input Sensitivity Frequency Response Total Harmonic Signal to Noise Ratio (A-weight Filter) Maximum S
Emergency Combination System ECS-6216MS The ECS-6216MS allow the addition of 16 output zones to the system 6000. up to 9 units can be added giving the system up to 160 output zone capacity. Each unit also offer 16Ch gPI sensor input for messaging, event and scenario triggering. •16Ch rElay grouP - 16CH AMP INPUT, SPEAKER OUT terminal is used for setting a amp and speaker to correspond with program setting.
FRONT/REAR PANEL 1 1 1 SPEAKER ZONE SELECT BUTTON AND DISPLAY (1~16) 1 2 3 4 7 5 6 8 9 1 FIRE SENSOR INPUT TERMINAL 2 PD, COM TERMINAL 3 LINK IN/OUT TERMINAL 4 TERMINATION SWITCH (LOAD/OPEN) 5 UPGRADE TERMINAL (ISP) 10 6 VOICE FILE CONTROL TERMINAL 7 SPEAKER OUT TERMINAL 8 AMP IN TERMINAL 9 ADDRESS SETTING SWITCH POWER INPUT TERMINAL SPECIFICATIONS ECS-6216MS Channel 16CH Communications LINK IN/OUT RS-485(1km) Protocol Source & Voice File RS-232(12m) Fire Sensor Operating Temperatur
Direct Box DIB-6000 The DIB-6000 is used to interface a windows PC to the PX-6216 audio matrix for the control of the system 6000. •SySTEM InTErfaCE - It connects to PC with USB cable and to ECS-6216P with CAT 5 cable. • MIC, lInE In/ouT PuT - It converts USB pc control to RS-485 PX-6216 control. It also allow the interface of PC audio with the system 6000 for playback of PC audio and PC stored audio files and scenario playback through the system 6000.
FRONT/REAR PANEL MIC 1 PRI. OFF INPUT 2 ON VOL MUTE 3 LEVEL 4 INPUT 5 OUTPUT 6 + MIN MAX VOL TO PC 8 POWER 7 + 9 DIB 6000 DIRECT BOX 1 MIC INPUT (BALANCED) 2 Priority (PRIORITY) ON/OFF Switch 3 MIC Volume 4 MUTE Volume 5 LINE IN (UNBALANCED) 6 LINE OUT (UNBALANCED) 7 LINE output (UNBALANCED) level control volume 8 USB Terminal 9 Power display LED LINE LINK 1 LINE INPUT TERM.
6000 SYSTEM 8BUS MAIN Inter-M Corp. (IMK) 653-5 Banghak-Dong, Dobong-Ku, Seoul, Korea Overseas Sales Team Tel_ +82-2-2289-8141~7 Fax_ +82-2-2289-8149 E-mail_ overseas@inter-m.com * Design and specification are subject to be changed without pre notice. www.inter-m.com 2013.
