Operation Manual CD/MP3/WMA/WAV Player CD-610U *Rack mount products in the Western Hemisphere (North America, South America, and the Caribbean) do not have handles installed due to customer preference.
CD/MP3/WMA/WAV PLAYER Welcome A personal welcome to you from the management and employees of Inter-M All of the co-workers here at Inter-M are dedicated to providing excellent products with inherently good value, and we are delighted you have purchased one of our products. We sincerely trust this product will provide years of satisfactory service, but if anything is not to your complete satisfaction, we will endeavor to make things right.
CD/MP3/WMA/WAV PLAYER Contents Unpacking .............................................................................................................................2 Installation Environment ...........................................................................................................................2 Important Safety Instructions .....................................................................................................2 Features ..................................................
CD/MP3/WMA/WAV PLAYER Unpacking Although your CD-610U is neither complicated nor difficult to operate, we recommend you take a few minutes to read this brief manual and familiarize yourself with the important information regarding product features, setup and operation. As with most electronic devices, we strongly recommend you to retain the original packaging. In the unlikely event the product must be returned for servicing, the original packaging (or reasonable equivalent) is required.
CD/MP3/WMA/WAV PLAYER Features - Most enhanced 3 beam type mechanism Highly maintain the shock absorption and stability with anti-shock automotive mechanism. - MP3/WMA/WAV Can play the CD-DA, MP3, WMA and WAV format - USB Playback MP3 files in a USB can be played directly. - Auto Play Automatically play the preset source when the unit is turned on. - RS-232C Can be controlled by a remote controller such as AMX or CRESTRON system.
CD/MP3/WMA/WAV PLAYER How to manage the Compact Disc (CD) The CD-6208 is designed for the playback of CD-DA, MP3, or WMA. Please use a CD with following mark: - Make the label side upward when inserting a CD in the disc slot. - Open a CD case with holding the right ending part of a case with the left hand and hold the both sides with the right hand from below. - Take off the CD with lightly holding both sides with the right hand while pressing the center of the case with index finger.
CD/MP3/WMA/WAV PLAYER Front Panel 1. SOURCE SELECt LED Indicating LED for the selected source in order of CD=>USB. 2. SOURCE SELECt BUttOn Push this button to select the source in order of CD=>USB. 3. DISC SLOt Insert a CD into the slot, label side upwards. The unit will pulls the disc when the CD is partially inserted. ※ DO NOT INSERT a CD of 8 cm size into the slot. 4. EJECt BUttOn Ejects a disc. 5. SELECt LED The LEDs indicates the Skip (I◀◀▶▶I), Folder ( ) or Search (◀◀▶▶) mode. 6.
CD/MP3/WMA/WAV PLAYER 7. EnCODER SWItCH / OK BUttOn Rotates this ENCODER switch to perform skip, folder change or search function after select the Skip (I◀◀▶▶I), Folder ( ) or Search (◀◀ ▶▶) mode. In menu mode, turning this ENCODER switch can changes the menu and pushing this button can change the setting. Changes the menu and pushing this button can change the setting. 8.
CD/MP3/WMA/WAV PLAYER Rear Panel 1. AC InLEt Connect the power cable supplied with the CD-610U. 2. RS-232C tERMInAL This terminal allows control by a remote controller such as AMX /CRESTRON etc. 3. DC InPUt DC 24V Power input terminal and can be used as back up power. 4. AnALOG MOnO OUtPUt MONO output terminal provides the mixed signal of L and R channel outputs. 5. AnALOG L/R OUtPUt (RCA) These terminals provide L and R channel signal output.
CD/MP3/WMA/WAV PLAYER Operation Method 1. PLAy / PAUSE 1) How to play CD (1) Insert a disc into the slot, label side upwards. (2) Select CD mode by pressing the SOURCE button. If there is no disc, the display will indicate as NO DISC. (3) After a disc is inserted, the display will indicate the information as below. - CD-DA : displays total number of tracks and total playback time. Track : 27 tracks Total Playback Time: 1hour 19min. 10sec.
CD/MP3/WMA/WAV PLAYER (2) Press the SOURCE select button to select the USB mode. (3) Total numbers of the folders and total numbers of files to play are displayed. 64 folders / 257 files If no files to play, then “NO FILE” is displayed. If a USB memory is not inserted “NO USB” is displayed. (4) Select a track to playback using the SELECT button and the ENCODER switch. - Select using the SELECT button and select a folder by turning the ENCODER switch. can be selected only when the USB has folder.
CD/MP3/WMA/WAV PLAYER ※ Note : When the unit is powered on when the Auto Play switch is in ON position, the unit will detect if CD is inseted. If the unit detects a CD, It will automatically play the CD with ALL REAPEAT mode. If the unit reliezes that there is no CD then It will try to detect if USB is inserted then It will automatically play the USB with ALL REAPEAT mode. If there are no CD or USB inserted into the unit, the display will be appear as “NO USB”.
CD/MP3/WMA/WAV PLAYER Block Diagram CD-610U 11
CD/MP3/WMA/WAV PLAYER Specifications CD-610U DISC (CD, CD-R, CD-RW) 12cm Number of Channels 3CH(L, R, MONO) Frequency Response (20Hz ~ 20kHz) +0.5/-2.0dB T.H.D. (20kHz LPF) 0.01%(NOR), 0.
CD/MP3/WMA/WAV PLAYER ※ DIMEnSIOnS CD-610U 13
CD/MP3/WMA/WAV PLAYER Service Procedures Take steps to insure the problem is not related to operator error or other products within the system. Information provided in the troubleshooting portion of this manual may help with this process. Once it is certain that the problem is related to the product contact your warranty provider as described in the warranty section of this manual. Schematic A Schematic is available by contacting your warranty provider.
NOTE
NOTE
NOTE
Inter-M, Ltd. (Korea) began operations in 1983. Since then, Inter-M has grown to become one of the largest manufacturers of professional audio and commercial sound electronics equipment in the world. Inter-M has gained worldwide recognition for its own branded products, as well as private label manufacturing of electronics sold under other names (OEM).
