Operating Manual

AUTOMATED REMOTE MESSAGE
10
ARM-911
1) Collect information on your network configuration.
-
A range of free IP addresses that can be allocated to the ARM-911 unit(s) without network conflicts.
- The correct subnet mask.
- The address of the Gateway and the DNS servers if you want your ARM-911 to be able to connect to
the Internet.
2) Open the web interface of your ARM-911.
3) Select the Network Setting page.
- Under the Connections tab, note the current network configuration of the ARM-911, including the IP
address, host name and MAC address. If the ARM-911 is configured to use DHCP, then these details
will not be shown.
4) Enter the static IP address and the subnet mask.
- Select the manual setting.
- Assign a static IP address to the ARM-911.
- Ensure that the subnet mask and Gateway corresponds to your network configuration.
- Other network settings are optional.
5) Validate the changes.
- Validate the new network configuration with the SET button.
If IP address or network configuration is changed, then have to connect the network with the changed IP
address.
3. Time Signal Setting
This menu allows you to set up scheduled messages and audio file to be playback.
Scheduled sound files and messages can be automatically played at any given time. Ideal for School bells,
chime scheduled messages and spot commercial announcements.