User Manual

1 2 3
5
4
EN - Page 3 of 7
Device overview
USE
1. Funcon key (ON/OFF)
If the charging process dos not start automacally, you can start it manually by briey pressing the
funcon key. You can stop the charging process and deacvate the Powerbank by briey pressing
the key twice.
Operation
LED light
% - Energy LED 1 LED 2 LED 3 LED 4
1 % - 25 %
26 % - 50 %
51 % - 75%
76 % - 100 %
3. Commissioning / Charging the Powerbank / Charging connected devices
a) Charging the Powerbank
Please connect the supplied USB-C cable with the USB-C connecon (USB-C In) of the Powerbank
and connect the other end of the USB cable with a standard USB-A connecon of a computer or
USB adapter. The charging process and the current charge status is signalled via the LED status
lights. When the Powerbank is fully charged, the LED status lights are permanently on. The requi-
red charging me of the Powerbank is dependent on the selected charging source and its output
(max. 5V / 3A).
2. LED Status display
The individual LEDs display the remaining energy of the Powerbank:
1 - Status LEDs
2 - USB-A Out
3 - USB-C IN
4 - USB-C OUT
5 - Function key ()