User Manual

USE

Device overview

1 - Charging area (smartphone)

2 - Status LED

3 - USB-C IN

4 - Charging area (TWS)

5 - Charging area (Apple Watch)

Operaon

LED status display

When you connect the device to the mains, the LED ashes green once and blue once to conrm and

then stays o. If you use the stand to charge a smartphone or the TWS area to charge your headphones,

the charging process is indicated by the LED on the front. During the charging process, the LED lights up

blue connuously. When the mobile device is fully charged, the LED usually changes from blue to green

(depending on the device being charged). If the LED ashes blue quickly, there is an error; for example, the

device is not posioned correctly, it has become too hot, there is a foreign object between the devices, or

an incompable power supply unit is being used. If you are using the charging area for the Apple Watch, the

LED does not light up; the watch‘s display indicates the charging process.

Start-up / charging compable devices

Step 1: Preparaon

Connect one end of the supplied USB-C to USB-C cable to the USB-C port (USB-C IN) of the inducve char-

ging staon and connect the other end of the USB cable to the supplied power supply unit (HP8). Next,

connect the power supply unit to a power socket (follow the safety instrucons).

Step 2: Start charging

You can charge three dierent devices (simultaneously) with this wireless charger.

a) Stand

You can charge your smartphone that supports the Qi standard via the stand. This works vercally and also

horizontally. Place your smartphone in the centre of the stand and the charging process starts automacal-

ly. The LED now lights up blue connuously during the charging process.

a) TWS

The TWS area (lower area behind the stand) of the device can be used to charge all devices that support

the Qi standard. These can be, for example, headphones or smartwatches from other manufacturers. To

nd out whether your device supports wireless charging via Qi, please refer to the corresponding operang

instrucons or contact the manufacturer. Place your device so that the Qi area of the device is centred

on the cross of the charging area. The charging process starts automacally, and the LED lights up blue.

EN - Page 4 of 6