Instruction Manual
EN - 2
This manual may not contain all the features of your device. For the use of third-party applications, please contact
the respective manufacturer. Please note that all details can be modified without previous announcement. Current
information can be found at www.intenso.de.
Trademarks
Google™, the Google™ logo and Android ™ are trademarks of Google™. All other product or service names are the property
of their respective owners.
2.) Notes
Avoid hard impacts to the device. Do not place it on inclined surfaces to prevent the device from
falling down.
Do not use the device in extremely cold, hot, humid or dusty areas; also do not expose to direct
sunlight.
Do not use it on sandy places.
Do not use it in hazardous environments, such as fuelling pumps at petrol stations.
Avoid using it on cushions, sofas or other objects that foster heat generation, due to the risk of
overheating.
Perform frequent data backups to avoid potential data loss. We are not liable for any loss of
data.
Do not disconnect when data is being transferred or the device formatted. This can cause data
loss.
Images and movies can be protected by third-party rights. Playing without a license can violate
copyrights.
Avoid use in highly magnetic fields.
Protect the unit from moisture. Should moisture enter the unit, please turn it off immediately,
clean it and dry the unit.
Please do not use chemical solvents to clean the device. Use only a dry cloth.
Do not place open flames, such as lighted candles, near or on the device.
We are not liable for damages caused by malfunctions, data losses, incorrect handling, own
repairs to the device or changing of the batteries.
Should the device not respond to your requests, please restart the device by pressing the reset
button on the back of it.
When not in use, please disconnect the mains adaptor from the power supply.
The outlet must be near the equipment and easily accessible.
Only use the AC adapter with grounded outlets with AC 100-240V, 50/60 Hz. If you are not sure
about the power supply at installation site, please ask the relevant energy services.