FCC Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’ s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Consumer {SM equipment, pursuant io Part 18 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Contents Unit and component —— — remember oz Disinfection principle and product structure 03 Using guide eee 04 AAT OUTPATIENT oneness ot sr 05-06 Operation 07-08 Disinfection and purification function 09 Technical parameters After-sales Warranty CaN —— mr mere 14 APP download and connection me 15-17 Controlling Authorization rrr 18 Thank you for using our air purifier.
Unit and component IV02-24B-RAXW UV-resistant high-efficiency Air Purifier silver ion and light self cleaning coating HEAP filter Power cord
Disinfection principle and product structure Disinfection principle a = Clean air This product adopts the form of circulating wind to drive the polluted air into the ultraviolet sterilizer, driven by the polluted air, combines high intensity ultraviolet ray, anion purification and primary and high efficiency filtration layer to realize the disinfection function.
Using guide evermore front pane 2 Remove UV-resistant 3. Install UV-resistant high-efficiency high-efficiency silver ion and light silver ion and light self-cleaning coating self-cleaning coating HEAP fitter HEAP filter 4 install front panel S. Lonnect power 6.
Precautions in order to prevent harm or property damage, please be sure to follow the following regulations and instructions. This sign indicates that the consonant is: This sign indicates that the content is: assuming the possibility of death or Ris assumed that thees isa possibility serious injury. of injury or malted damage. Naming Notice This sign indicates that the contents: This sign indicates that the contents prohibited content. mandatory content rust be enforced.
Precautions Do not use the machine under the seriously Do not use the machine under the damp environment such as bathroom, high lampblack environment such otherwise says to cause electric leakage, as kitchen, otherwise the machine electric shock, fire, efx. will cause damage, and can note used as ventilation fan.
Operation Timon Push the touch button to tum on the machine. Enter automatic mode immediately after booting, SI The icon is always bright after boot When the corresponding function is enabled, the text indicator light will be on, the digital area will be displayed then the PM 2.5 value will be displayed. Automatic disinfection SR. "before 10s, and Boot default automatic mode; the volumetric is adjust with PM 2.
Operation Child lock function L Push “Child lock” key to enter into the child lock function, song press or scan be unlock 2 When the child lock is not on, press and hold this button for 3 seconds to view the accumulated usage time of the filter, displayed in the PM2 5 area. The filter indicator lights up, and when four digits are displayed, it is displayed as a three-digit running. Sterilization function Push “disinfection” key, tum onoroffUviamp, um nor off ultraviolet sterilization function.
Disinfection and purification function e Physical filtration of bacteria and dust L The dust and microorganism bacteria in the air are filtered by physical filtration, and the alr is sterilized by combining with high intensity ultraviolet ray At the same time the influence of dust on the ultraviolet lamp radiation intensity was effectively prevented by the fitter. UV lamp and filter can be easily replaced and loaded. @ Silver ion and Lighting Self Cleaning Coating on HEAP Filters 2.
Technical parameters Product name Rated frequency WV lamp power App area Material Carton size GW. Sensor type This product complies with the maximum allowable concentration of ozone of 0.050 parts per million by volume (ppm} in a 24-h period.
Cleaning and maintenance NOTICE:Pull out Plug before maintenance and cleaning. Main machine: please wipe the surface of the machine regularly by a damp cloth with a small amount of detergent water, and clean the air inlet &outlet with a brush. UV lamp: the radiation intensity height of UV lamp will affect air disinfection effect, every month should wipe UY lamp with alcohol cotton ball once at least. To ensure that the radiation intensity height of UV lamp is not affected by dust.
Troubleshooting Please confirm the faults before sending for maintenance below cases. Mathematician’ turn. Display panel does’ work, 1. Check the power cord is connected te the socket or not. 2. Check the power cord is connected to the device or not, 3. Hack the front panel is covered well or not. When running automatically, the air quality indicator always showered other PM value is always on the high data. 1.
After-sales service rights and interests 1. According to the “three guarantees” provisions of the state. 2. The machine enjoys the lifelong maintenance service of the company's after-sales service center, 3. The following situations fall outside the scope of the "three guarantees” : A. The machine is damaged due to human factors. B. Damage caused by disassembling and repairing without authorized by the company. C. Normal loss and wear during operation. D. Filters. E.
After-sales warranty card IV02-24B-RAXW Air Purifier Warranty Card Model Warranty period) DD-MM-Y Name Buyer Phone Address Name Seller Phone Address Warranty treaty a} From the date of purchase, the warranty period is 1 bear, and the warranty period Is free of charge (irresistible factors. artificial cause excepted). i} The complimentary purchase is not covered by the warranty. After sales | 2) vouchers: purchase records, purchase vouchers issued by service the company and invoices are all acceptable.
APP Download NOTE Long press the plasma button for 3s, the WF! enters the state of network distribution, and the WIFI tun flashes quickdy. In successfully connected WF! mode, you can still use the buttons on the product fo control. To disable WIFI mods, press the plasma bunion for 3s. if you need to reconnect, hold down 3s again to enable WIFI function. ~BB8.
1.Click en the upper right corner a 5. The installation is surliness and open the APP 2Choosetoapen Cicktodownioad 4 Download and In browser snd install inst Henley Set Pass wend 6. Click “Sign up” 7.
® 8. Successful registration, click *Add Device" 13. Connecting SEB the small 11. Enter the WiFi 12. Long press the household appliances, password “PLASMA click “Air Purifier and click “Newt® button for 3 seconds to start the WIF! function, and then click “Next! 14, Connected successfully 15.
1. Click persona Center” 2. Click "Share Device” 3. Click °Add Share” in the upper right comer 4. After entering the user 5. if the sharing is &.
To ensure that vou can fully understand and correctly install and use this product please read the instructions carefully. It is recommended that you keep the manual properly for reference when needed.
