User Manual

Chapter 2
CE Batch Installation
7
•
Windows XP/Windows Server 2003: “Batch Installation Prerequisites
for Windows XP/Windows Server 2003” on page 12
• Windows Server 2003: “Windows Server 2003 Requirement AFTER
DMS Installation” on page 12
Batch
Installation
Prerequisites
for Windows
Vista and
Windows 7
If you are using Windows Vista and Windows 7, follow these basic steps
for batch installation preparation:
1. Windows Vista/Windows 7 use Internet Information Services (IIS)
v7.0. To use IIS v7 for workstation-batch database communication, cer-
tain settings must be turned on PRIOR to IntelliTrack DMS installation
on the device. This includes: Turning On IIS, Turning On IIS Web
Management Tools, and Turning On IIS World Wide Web Services.
Please refer to
“Required IIS Settings for Windows 7 and Windows
Vista” on page 8 for more information.
2. Familiarize yourself with the RDA components. Please refer to
“Remote Data Access (RDA) Components” on page 15 for more infor-
mation.
3. Windows Vista/Windows 7 uses Windows Mobile Device Center Soft-
ware for PC-device data synchronization. You must set up a Windows
Mobile Partnership between the PC and the device. Please refer to
“Using Mobile Device Center Software” on page 27, “Required WMDC
Work Network Setting” on page 28, and “Setting Up a Windows Mobile
Partnership” on page 28 for more information.
4. IntelliTrack DMS uses Remote Data Access for workstation-batch
database communication. IntelliTrack supports automatic and manual
setup options. You must determine your setup option and go through
the RDA setup configuration steps before installing IntelliTrack DMS.
Please refer to
“Remote Data Access (RDA) Components” on page 15
for more information.
5. After you setup Remote Data Access and install IntelliTrack, test your
setup by going to the DMS Batch Synchronization Utility and testing
the Sync URL setting. Please refer to
“Sync URL Setting” on page 30
for more information.
6. If you are using a Firewall, specific ports must be set as exceptions.
Please refer to
“Applying Firewall Exceptions” on page 28 for more
information.
7. Make sure that User Account Control (UAC) is disabled. Please refer to
“Disabling User Account Control (UAC)” on page 8 for more informa-
tion.