EOSP-610 Dual Zone Wireless Transceiver TM User Manual TM commercial wireless audio
Thank You For Choosing Eos Wireless! We hope you will get much enjoyment from your wireless audio system. Please read the entire contents of this manual. It is filled with reference information that will allow you to get the most from your new Eos system. If you have any questions, please check our web site at pro.eoswireless.com/support or call us at 877-465-3927. Your Total Satisfaction – Eos Job #1 Congratulations on your purchase of the Eos Digital Pro Series Audio System.
Table Of Contents Contents Important Safety Instructions 4 FCC Information 5 Limited Warranty 6 Product Support 6 Player Setup 7 Wireless System Setup 7 Placement 7 Zone Select 7 RX Mode 7 TX Mode 7 Linking Procedure 8 Adding Additional Wireless Speakers/Receivers 8 Functions & Controls 9 3
A Consumer Guide to Product Safety Important Safety Instructions Please take the time to follow the instructions in this manual carefully. It will help you set up and operate your system properly and enjoy all of the advanced features. Please save this manual for future reference. WARNING: To reduce the risk of fire or electrical shock, do not expose the product to rain or moisture. Avoid prolonged exposure to direct sunlight. WARNING: Liquids can cause a failure and/or a fire hazard.
A Consumer Guide to Product Safety FCC Information Information about products that generate electrical noise if applicable, this equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
A Consumer Guide to Product Safety Limited Warranty IntelliTouch warrants this product to be free from manufacturing defects in material and workmanship under normal use and conditions for a period of 1-year from date of original purchase in the United States. In order to validate your warranty, you must register your product by going on-line (pro.eoswireless.com/register), or by calling 877-465-3927 between Monday through Friday, 8:30AM to 5PM Pacific Time.
Connections Player Setup Wireless System Setup The Eos Pro Series Wireless Transceiver can act as either a transmitter (TX) or a receiver (RX). In TX mode the transceiver can send wireless audio signal to either Eos Wireless Speakers (EOSP-622) or another Eos Transceiver in RX mode. In RX mode it can receive wireless audio from either the EOSP-500 Dual Zone Music Player with the EOSP-510 wireless transmitter card installed, or from another EOSP-610 transceiver in the TX mode.
Set Up Linking Wireless Transmitters & Wireless Speakers/Receivers Before initial use, you must link the wireless transmitter (TX) with the wireless speakers/ transceivers (in RX mode). Follow the simple steps below to perform this linking procedure. You can link up to 8 wireless speakers/transceivers (in receive mode) to the transmitter.
Operation Functions & Controls Line level input/outputs connect to any music source amp or music on-hold input Link button Used to link wireless speakers, receivers and transmitter Mode select switch allows selection of transmit (TX) or receive mode (RX) Impedance output select switch allows selection of 8/600 output on left channel Zone select switch allows selection of Zone 1 or Zone 2 in either transmit or receive mode 9
TM commercial wireless audio 877-465-3927 www.eoswireless.
