User Guide

Intellisense Systems Inc.
Page 8
TM-AWAR-USG rev 1
User Guide – AWARE Flood System
IMAGE SCHEDULE
This tab is for units that are equipped with a water-resistant camera module. It allows the user to schedule
specific days and times for the unit to capture an image. It also enables the unit to visually verify conditions
outside of events. Each device assigned to the user is prepopulated to this tab. For each desired unit, check
the “Schedule Enabled (Input)” check box and use the drop-down boxes to set the day and time (UTC) of the
desired schedule. If you would like to reset the days/times previously set, select the “Schedule Clear (Input)”
check box. Once the desired changes have been made, click the “Set Image Schedule” button at the bottom
of the list.
Figure 6: The Image Schedule Window