User Guide

Intellisense Systems Inc.
Page 7
TM-AWAR-USG rev 1
User Guide – AWARE Flood System
ALERT SETTINGS
This tab allows the user to set up destination SMS and email addresses. Each device assigned to the user is
prepopulated to this tab. For each desired unit check the “Alert Enabled (Input)” check box and insert the
desired destination into the “Alert Email(s) (Input)” text box. Once these changes have been made click the
“Change Alert Settings” button at the bottom of the list.
NOTE: If multiple destinations are desired, simply insert a comma in between each destination. You may
also configure the unit to send SMS text messages by providing inserting the full phone number along with
the correct carrier’s SMS gateway domain. Below are a few examples of the most used SMS gateway
domains in the US.
AT&T - [insert 10-digit number]@txt.att.net
Google Fi - [insert 10-digit number]@msg.fi.google.com
T-Mobile - [insert 10-digit number]@tmomail.net
Verizon - [insert 10-digit number]@vtext.com
Figure 5: The Alert Settings Window