User Guide

Intellisense Systems Inc.
Page 11
TM-AWAR-USG rev 1
User Guide – AWARE Flood System
Accessing the Unit Dashboard
Clicking on an active icon will pop-up a preview window with the current data (as shown in Figure 3).
Clicking on “Go To Unit Dashboard” or on any item from the list to the right will make the website navigate
to the Unit Dashboard, which displays complete details of the unit.
Figure 9: Navigating to the Unit Dashboard
The Unit Dashboard shows the following information:
1. The signal strength of the cell modem
2. The water depth graph both in inches and in feet (NAVD88 adjustable)
3. The current reporting mode interval
4. Battery voltage
5. Pressure calibration
6. An image of the site (if requested with the optional water-resistant camera sensor installed)
NOTE: The user may change the amount of time displayed in
the historical data graphs by clicking on the clock icon. The
user can zoom into a specific time frame with a simple click
and drag around the desired data point.
From the Unit Dashboard, the user can request that the unit
take an image and update the GPS coordinates. The image will
appear in the pop-up preview window and dashboard view
when available.