User manual

23
Parameter Description
Filter Type Disable – Disable the MAC Address filter function.
Accept – Only the wireless stations with the MAC Addresses
setup in the table can connect to the AP.
Reject – The wireless stations with the MAC Addresses setup in
the table will be rejected to connect to the AP.
Filter MAC Address MAC Address is a unique identification for hardware devices in
the network. It is a 12-digit hexadecimal values.
There are fifteen sets of MAC Addresses can be setup in the
table. Fill the MAC Addresses of wireless stations you want to
accept or reject to access the AP in this table.
Change/Apply Click “Change“ will activate the setting of MAC Address Filter. In
the meantime, the button will change to “Apply“ for you to confirm
your settings.