Installation guide

Parameters Default Description

Alias Name The alias name of this router.

ESSID default

This is the name of the wireless LAN. All the

devices in the same wireless LAN should have

the same ESSID.

Channel Number 11 The channel used by the wireless LAN. All

devices in the same wireless LAN should

use the same channel.

Click <Apply> at the bottom of the screen to save the above configurations. You can now

configure other advance sections or start using the router (with the advance settings in place)

2.4.2 Advanced Settings

You can set advanced wireless LAN parameters of this router. The parameters include

Authentication Type, Fragment Threshold, RTS Threshold, Beacon Interval, Preamble

Type …… You should not change these parameters unless you know what effect the

changes will have on this router.