User manual

10
3. Double click the “Network” icon on the Control Panel window
4. Click the “Configuration” tab and check the TCP/IP protocol is available or not. If
yes, skip the procedures 5 ~ 6. If no, click the “Add” button.
11
5. Select “Protocol” item on the Select Network Component Type window. After that,
click “Add” button
6. Select “Microsoft” item on the left side of Select Network Protocol window. After
that, select “TCP/IP” protocol on the Network Protocols block and click “OK”
button.
7. Select the “TCP/IP” component in the Configuration tab of the Network window. Click
“Properties” button.