User manual

8
Installing And Using Wireless Router
This Chapter provides a step-by-step guide to the installation and
configuration of the Wireless Router. It assumes that your computers use the
Windows 95/98 or newer version and a WEB browser is installed for
configuration purposes. We suggest you go over the whole chapter and then
do more advanced operation.
Network configuration setup
Steps to build up the network:
 Connect the ADSL or Cable modem to the Ethernet WAN port on the back of
the Wireless Router by using the UTP cable.
 Connect the phone line from the wall socket to the line-in port on the ADSL
modem, or the coaxial cable to the line-in port on the Cable modem.
 Plug-in the power adapter to the modem and turn on the power. Install the
Ethernet card into the computer by referring to the User Guide that came with
the card.
 Connect the computer to the Wireless Router by using standard twisted-pair
Ethernet cable from the computer’s Ethernet card to an 10/100Mbps Ethernet
port on the back of the Wireless Router.
 Plug-in the power adapter to the Router and the other side to the wall outlet.
9
Computer configuration setup
In order to communicate with Wireless Router, the connected computer needs to
install the TCP/IP protocol and setup the related address information.
1. Double click the “My Computer” icon on the desktop screen
2. Double click the “Control Panel” icon on the My Computer window