User`s manual

117
the SMB group that this print server belongs to. All PC
should join the same group before they can use this print
server by SMB protocol.
“Pass Job When Error Occurred” is for you to set the
interval time for bypassing the current printing job in order
to avoid the printing job is not printed completely while the
printer is interrupted unexpectedly because of paper out or
off line.
8.4.5 SNMP
The print server supports SNMP configuration. If it is
enabled, please set up the following parameters.
SNMP System Contact:
You can enter the print server
administrator’s contact information here. This information
will be displayed in the SNMP management tool.