User`s manual

116
“Disable Use the following TCP/IP Settings” to manually
assign “IP Address”, “Subnet Mask” and “Gateway” for the
print server.
You can enable/disable or set auto for the print
server’s DHCP server. The DHCP server is disabled by
default. If the DHCP Server is enabled or set Auto, you
have to assign a range of IP addresses here. Fill in the
“Start IP”, “Range”, “DNS”, “Subnet Mask” and “Gateway”,
and the print server will assign a unique IP for each client.
Note that when “Auto” is selected, the DHCP Server of the
print server will be enabled only when there is no other
DHCP Server within the network.
8.4.4 SMB
You can enable/disable the SMB protocol from here. If
SMB is enabled, enter the “SMB Group Name” to specify