Product specifications

8
WAN Port
The WAN port is used to connect to an ADSL/Cable modem for linking to the
Internet.
WAN MDI/MDIX Switch
The WAN MDI/MDIX switch is used to adjust the cable connection of the
WAN port. If the port is connected to hub, you should move the switch to the
“hub” side; if the port is connected to PC like machine, you should move the
switch to the “PC” side. As for the four LAN ports, there is no need to add
additional switches for each cable connection. This is because the LAN ports
support auto MDI/MDIX.
LAN Ports
The LAN ports are used to connect to a PC, server, hub, switch or other
network devices on the intranet.
Reset Button
If you forget your password and/or IP settings, you will not be able to access
the SA. You can use the Reset Button to restore the factory settings. To
initiate a reset, you must hold the button for at least 5 seconds.
The primary default settings are listed in the following table.
Configuration Item Default Settings
Administrator Username <empty>
Administrator Password admin
Internal IP address 172.16.1.1
Power Button
You can use the Power Button to turn on/off Powerful Server appliance.