Product specifications

73
Searching the Network for the NAS
If you are not able to locate the NAS in the Network Neighborhood or My
Network Places, you can try to
search for it.
Click Search under My
Network Places.
Enter the name of the NAS or
the Fixed IP address if
configured that way and click
Search Now.
All other company and/or products names are trademarks and/or registered trademarks of their respective owners.
HD Installation Note
To install HD, Please follow the step listed below:
1. Shutdown server and unplug power cord
2. Take off HD cover then affix HD onto the cover with screws provided.
3. Set jumper of HD to “Master” or “Cable select”. For detail positioning
please refer to HD supplier’s manual.
4. Plug in IDE flat cable and HD power cord on HD.
5. Affix HD cover onto server. While installing HD. Please be careful as not
to mash flat cable and HD power cord.
6. HD installation is now complete. Please turn on server.
HD Replacement Note
For replacement of HD when old one is unusable, Please follow the same
steps stated above. If previous configuration is RAID-1, server will
automatically rebuild as well as resync data between 2 HDs after power on.
Server is now ready for normal operation. On the other hand, if previous
configuration is RAID-0 or single, please initialize HD before use.