Product specifications

56
When any HD is removed or broken and cannot be operated in RAID 1,
you will see "Not Active" shown in Status field. The system will set in
Degraded mode and Recall cannot be run (Figure 3.8j).
Figure 3,8j
RAID 0 (Stripe)
After initializing to RAID 0 (Stripe), as shown in Figure 3.8k, you can see
that total size is the sum of two hard disks. Please be reminded that the
total size of RAID 0 would always be the sum of Disk 1 and Disk 2.
Figure 3.8k
Because RAID 0 has no fault tolerance function, It is cannot be activated
when any HD is broken. (Figure 3.8l)
Figure 3.8l