Product specifications

3. Enter the External Gateway.

4. Enter the External Netmask.

5. Click the apply button.

Example 2: DHCP Client / Cable Modem•

If you have a dynamic IP address from your ISP to access the Internet,

please select the DHCP Client radio button. Once the external IP

address is obtained via the DHCP protocol, there is no need to give an

external IP address, external gateway address or netmask. The DHCP

server will dynamically assign these fields. In general, you should choose

this option if you are connecting the Powerful Server appliance to a cable

modem. Note: Cable modem users MUST disconnect the cable modem

from the wall outlet for at least 2 minutes before turning it on again. Some

cable modem connections need you to provide specific hardware address.

For the case, you should fill your hardware address that you get from your

ISP provider in Hardware Address field to override the original hardware

address. However, it does not update the original hardware address

stored in EEPROM. If you would not like to override the hardware address,

you should set each field of the Hardware Address to zero “00”.