User manual

RESOLUTION

Firmware Version Displays current ﬁrmware version.

Firmware Update Click “Firmware Update” to update new ﬁrmware for the Camera. This may

take a few minutes.

Reset to Default If you want to reset the Camera, click this button. The default settings of the

Camera are as follows. Camera Name: “IPCamera_MJPEG”, IP Address:

“192.168.2.3”, Subnet Mask: 255.255.255.0, Administrator Name:

“Admin”, Password: “1234”, Video Port: “4321”, Web Port: “80”

USING THE ADMINISTRATOR UTILITY