User manual

Plug the AC adapter into a surge

protector.

Turn on the power on the NAS.

If the LAN link LED in the front of the NAS is not ON,

please change the switch next to the LAN port of the

NAS unit to the alternate position. Power off the NAS

and turn it back on to get an IP address from the

network.

Accessing the NAS

If your unit shipped with a preformatted hard

drive, you can find the new share folder by

double clicking My Network Places and the

Nas device name.

Mapping A Share Folder

Mapping your shared folder(s) to your computer makes accessing them easier. When a

shared folder is mapped, it will appear as a drive letter like D: or E: on your computer.

When you want to access that shared folder, you can simply go to My Computer and

double click on the drive letter. You can also have the computer log into the shared folder

at startup so you do not have to manually do it each time.

You can map the NAS’s share folder to

a drive letter under My Computer.

Select Map Network Drive from the

Tools menu.