User manual

27
Trigger Condition
You can configure the trigger condition including, motion detection, input port action and timer
condition.
Configuring Motion detection
1. Click the "‘Show me motion area"
button at the bottom of the live
image and the block zone appears
as an overlay on the live image.
2. Click to activate / deactivate
individual motion detection blocks.
Click "Set all" to set the motion area
to entire image.
3. Select the Sensitivity from the
drop-down list from lowest to
highest. A higher number means
higher sensitivity.
4. Click "Save motion area" to
complete setting the motion area.
Motion detection
Motion detection is used to
generate an alarm whenever
movement occurs in the video
image. A total of 5 levels can be
configured.