User manual

25
Event Setting
An Event setting is as set of parameters describing how and when the Speed Dome Camera is to perform
certain actions.
Triggering enabled.
Check this option to enable the Event Trigger Configuration.
Trigger Source
A Triggered event can be activated by four different types of events.
Motion Detection
Check to activate and set the time schedule for this type of event.
Input port
Check to activate and set the time schedule for this type of event.
Timer
Check to activate. This is to send captured image periodically.
Manual trigger
Check to activate. The manual trigger can be activated on the live view page of the Web browser.
Action resulting from event triggering – Upload image/video
Upload image/video (by email, FTP)
Activates the FTP and/or e-mail delivery of captured images.
Capture FPS
Define the frame rate of the captured video/images.
Pre-/Post-Trigger buffer
Set the image capture time before and after event within a limit of maximum image capture time.
The maximum image capture time is calculated automatically by the system according to the settings.