User manual

If your switch has crashed and simply clicking “Apply Settings”/“Restart Servers” has no effect
on your restoration effort, a last resort is to completely reboot the switch by clicking “Reboot
Device.” NOTE: The reboot brought about by clicking “Reboot Device” is a total reboot and
takes longer to boot up completely, while clicking “Restart Servers” is much quicker (just few
seconds) since it restarts only the server programs on the switch.
Apply Settings: Restart Servers
Any new settings are only committed to the switch’s database by clicking “Store Settings,”
“Store” or “Store User” on each setting screen. However, just clicking any of these buttons
won’t immediately validate these new settings: You should click “Restart Servers” so that new
settings can be put into use at once. NOTE: Clicking “Restart Servers” will disconnect all current
viewer connections. As mentioned above in Maintenance: Reboot, clicking “Reboot” is an option
if clicking “Restart Servers” provides no results, but, as a total reboot, will require more time.
60
MANAGEMENT OVER A BROWSER