User manual

Enable RADIUS Accounting
Select to enable RADIUS accounting support and modify the settings.
Port: Specify the port used for RADIUS accounting. By default, it’s set to 1813.
Accounting Server: Enter the IP address of the server offering the RADIUS accounting service.
Second Server (if any): Enter the IP address of the secondary server, if you’ve got any backup
RADIUS accounting server that offers RADIUS accounting service.
RADIUS Secret: Specify the RADIUS secret (or Shared Secret) between the RADIUS client
(e.g., IP KVM) and the RADIUS server. The RADIUS secret is a shared text string used as
a password between the RADIUS client and RADIUS server.
Users: Current Status
This screen displays the remote users currently connected. NOTE: This screen doesn’t refresh
automatically, so to see whether there’s any change, click “Refresh” to update the information.
 Only when “User Password” has been selected as your password policy will the
currently connected users be registered and shown on this screen. If you’re using another
password policy (No Password or Global Password), connected users won’t show on this screen
since these policies imply that the distinction of user identities is not necessary.
Alarms: E-mails
This screen allows you to set up the e-mail notication for alarm events. After you’ve made all
modications, click “Store Settings,” then “Apply Settings”/“Restart Servers.”
E-mail From
Sender e-mail address used by the switch for alarm e-mails. This address can help identify
which switch is the sender, and must be accepted by the SMTP server.
E-mail To
The e-mail address(es) of any switch alarm e-mail addressee(s). NOTE: You can use commas
for multiple recipients: [e-mail], [e-mail], [e-mail].
54
MANAGEMENT OVER A BROWSER