ADSl2+ broadband modem router quick start guide Models 523462 (annex A) & 523998 (annex b) INT-523462/523998-QSG-0207-02
fcc regulatory statements FCC Part 68 This equipment complies with Part 68 of FCC Rules. On the bottom of this device is a label with the FCC registration number and ringer equivalence number (REN) for this equipment. You must provide this information to the telephone company upon request. The REN is useful to determine the quantity of devices you may connect to the telephone line and still have all of those devices ring when your number is called.
INTRODUCTION Thank you for purchasing this INTELLINET NETWORK SOLUTIONS™ ADSL2+ Broadband Modem Router, Model 523462 (Annex A) or Model 523998 (Annex B). An all-in-one modem, router, firewall and Fast Ethernet 4-port switch, it allows you to access the Internet and download music, play interactive games online or surf the Web at double the speed previously available through ADSL2.
installation package contents • ADSL2+ Broadband Modem Router • Power adapter • Ethernet Cat5 RJ-45 cable, 1.0 m (3 ft.) • RJ-11 telephone cable, 1.8 m (6 ft.) • Quick start guide • Setup CD with user manual and setup wizard connections NOTE: In addition to the items listed above in Package Contents, the minimum requirements necessary to configure and use the ADSL2+ Broadband Modem Router include a PC with a pre-installed Ethernet adapter and a Web browser (Internet Explorer 4.0 or higher).
other dial-up devices. • It is recommended that the router first be configured with the Ethernet cable connected prior to setting the wireless functions. NOTE: This setup wizard can be run in Windows 98SE, Me, 2000 or XP. The following procedures represent Windows XP, but are similar for 98SE/Me/2000. 1. Insert the enclosed setup CD (featuring the setup wizard) into your CD-ROM drive. The Autorun.exe program should be executed automatically. If not, run Autorun.
web management configuration Once the PC has obtained an IP address from the router, enter the default IP address 192.168.2.1 (the router’s IP address) into the PC’s Web browser and press “Enter.” NOTE: If you are unfamiliar with how to obtain an IP address from the router, refer to the IP Address Setting section in the user manual. The login screen will appear. Enter the username and password, then click “OK” to login. By default, the username is “admin” and the password is “1234.
PPPoE VPI/VCI, VC-based/LLC-based multiplexing, Username, Password (and Service Name). PPPoA VPI/VCI, VC-based/LLC-based multiplexing, Username, Password. RFC1483 Bridged VPI/VCI, VC-based/LLC-based multiplexing to use Bridged Mode. RFC1483 Routed VPI/VCI, VC-based/LLC-based multiplexing, IP Address, Subnet Mask, Gateway Address and Domain Name System (DNS) IP Address (a fixed IP Address). 1. Click “Run Wizard” to start the configuration. 2. Click “Next” to continue. 3.
4. Select the time zone; click “Next” to continue. 5. Select your Internet connection type (as directed by your ISP); click “Next” to continue. 6. Enter the data provided by your ISP. For details on each setting, see the Interface Setup section in the user manual. Click “Next” to continue.
7. Restart your ADSL router. Click “Next” to save the settings and restart the router.
specifications Standards • IEEE 802.3 (10Base-T Ethernet) • IEEE 802.3u (100Base-TX Fast Ethernet) • ADSL2+ (ITU G.992.5) up to 24 Mbps • ADSL2 (ITU G.992.4) splitter-less ADSL, up to 12 Mbps • ADSL2 (ITU G.992.3) up to 12 Mbps • ADSL (ITU G.992.2/G.Lite) up to 1.5 Mbps • ADSL (ITU G.992.1/G.DMT) up to 8 Mbps • ANSI T1.413, Issue 2 (Asymmetric DSL) General • LAN ports: 4 RJ-45 10/100 Mbps data ports • LAN ports with Auto MDI/MDI-X • Flash: 2 MB • Memory: 8 MB SDRAM • Throughput max.
• Firewall: - Access control based on MAC address - Domain blocking - URL filter • Supports UPNP (Universal Plug and Play) • Supports DHCP (client/server) • Supports VPN pass-through (IPSec, PPTP, L2TP) • Certifications: FCC Class B, CE Mark, RoHS Power • External power adapter: 12 V DC, 0.5 A Package Contents • ADSL2+ Broadband Modem Router • Quick start guide • Setup CD with user manual and setup wizard • Power adapter • Ethernet Cat5 RJ-45 cable, 1.0 m (3 ft.) • RJ-11 telephone cable, 1.8 m (6 ft.
www.intellinet-network.com Are you completely satisfied with this product? Please contact your INTELLINET NETWORK SOLUTIONS™ dealer with comments or questions. Copyright © INTELLINET NETWORK SOLUTIONS All products mentioned are trademarks or registered trademarks of their respective owners.
