User`s manual

3.5” LAN HDD Enclosure Installation Guide
6
Network Configuration
How to get LAN Disk work?
Before enjoying LAN
Disk’s service, you have to
run Set up first. To setup
LAN Disk, you have to
make LAN Disk connect to
your computer. Following
procedures below will guide
you to make the connection
easily.
The default IP of LAN Disk
is 169.254.0.1. In order to
connect LAN Disk to your
computer, you have to make
both devices in the same
network domain. In short,
LAN Disk and your computer must have the same prefix of the IP address, such as
169.254.0.x or 192.168.1.x.
Set your PC to obtain IP address
automatically
LAN Disk is set to be a DHCP server as
default. It’s better to set your computer to
obtain an IP from DHCP server automatically.
1. Start Æ Settings Æ Network Connections