User`s manual

3.5” LAN HDD Enclosure Installation Guide
11
Host Name: The default setting is “STORAGE OR STORAGE-XXXX”. The Last four
digits are MAC Address.
Group Name: The default setting is “WORKGROUP “. Enter a new name into “Group
Name” and click “OK” button to change to a new group.
2.2 Change the Administrator’s “Password”
By clicking the icon “Change” at the right side of “Administrator”, enters into
“Administration” page, you can change the “Password” of administrator to your own.
Administrator: admin (default). This can’t be changed.
Password: admin (default)
NOTE:
If you have made any change of “Password”, you have to enter this Password to get
into LAN Disk Management and Configuration pages next time.
2.3 Change the “Date/Time”
By clicking the icon “Change” at the right side of “Date/Time”, enters into
“Date/Time” setup page, you can adjust Date/Time to its right number.