User`s manual

3.5” LAN HDD Enclosure Installation Guide
10
2. LAN Disk Information - Status
You can check all the LAN Disk information including “System Information”,
“Network Information” and “Disk Information” from “Status” page as below
.
Follow the descriptions described in the following sections. You can change the
IP/configurations shown on the status page by yourself.
Firmware version: Show the built-in version from factory.
Disk ID: Show the built-in version from factory.
Free Size: Show the available capacity of the HDD.
Total Size: Show the total capacity of the HDD.
2.1 Change the “Host Name” and “Group Name”
By clicking the icon “Change” at the right side of “Host Name” and “Group Name”,
enters into “Identification” page, you can setup your own Host name and Group name.