Instructions

14
Gigabit Ethernet PoE+ Web-Managed AV SwitchUser Manual
PORT SPEED LIMITS
This feature allows you to limit the data rates for a particular port on the Switch. When the data rate exceeds
user-configured values, the switch drops packets immediately. Rate limiting is configured for two types of
transmissions, which are ingress and egress. Ingress traffic is received on any given port (incoming, inbound,
download or input speed), whereas egress traffic is traffic sent out (outgoing, outbound, upload or output
speed) to another network client. The following image shows the Port Speed-Limit page. This page is used to
configure the send and receive rate of the port.
PORT ISOLATION
The following image shows the page for Port Protection. Port isolation prevents network clients, such as PCs
on different ports, from communicating with each other without the necessity of configuring a VLAN.
PORT LEARNING LIMIT
The following image shows the Learn Limit of the each port. This page is used to restrict how many MAC
addresses the port is allowed to learn. The default value is the maximum of 8191.
Switch
Switch
Switch