User manual

72
key here; if you enter multiple WEP keys, they
should all be different.
Enable 802.1x IEEE 802.1x is an authentication protocol.
Authentication (9): Every user must use a valid account to log in to
this wireless router before accessing the
wireless LAN. The authentication is processed
by a RADIUS server. This mode only
authenticates users by IEEE 802.1x, but it does
not encrypt the data during communication. If
there is a RADIUS server in your environment,
enable this function. Check this box and
another sub-menu will appear:
RADIUS Server Enter the IP address of the RADIUS server
IP Address (11): here.
RADIUS Server Enter the port number the RADIUS server
Port (12): here.
RADIUS Server Enter the RADIUS server password here.
Password (13):
11
12
13
TIPS: Some examples of WEP keys (Don’t use these; use your own!):
ASCII (5 characters): pilot phone 23561 2Hyux #@xmL
ASCII (13 characters): digitalFAMILY 82Jh26xHy3m&n
Hex (10 characters): 287d2aa732 1152dabc85
Hex (26 characters): 9284bcda8427c9e036f7abcd84
To improve security, don’t use words found in a dictionary or which
are too easy to remember! (“pilot” and “phone” are examples of bad
choices). Wireless clients will remember the WEP key, so you only
have to input the WEP key for a wireless client once.