User manual

2-6-3 Static DHCP Leases Table

This function allows you to assign a static IP address to a specific

computer forever, so you don’t have to set the IP address for a

computer, but can still enjoy the benefit of using DHCP server. A

maximum of 16 static IP addresses can be assigned here.

(If you set “Lease Time” to “forever” in the DHCP Server section,

you can also assign an IP address to a specific computer

permanently; however, you will not be able to assign a certain IP

address to a specific computer since IP addresses will be

assigned in random order this way).

Below are descriptions of the options:

Enable Static Check this box to enable this function;

DHCP Leases (1): otherwise uncheck it to disable this function.

MAC Address (2): Input the MAC address of the computer or

network device (total 12 characters, with

characters from 0 to 9, and from a to f, such

as “001122aabbcc”).

IP address (3): Input the IP address you want to assign to

this computer or network device.

Add (4): After you enter the MAC address and IP

address pair, click this button to add the pair

to the static DHCP leases table.

To remove all characters you just entered, click “Clear.”