User manual

109
Below are descriptions of the options:
Enable DMZ (1): Check this box to enable the DMZ function;
uncheck this box to disable the DMZ function.
Public IP You can select “Dynamic IP” or “Static IP” here.
address (2): If you select “Dynamic IP,” you need to select
an Internet connection session from the
drop-down menu; if you select “Static IP,” input
the IP address that you want to map to a
specific private IP address.
Client PC IP Input the private IP address that the Internet
address (3): IP address will be mapped to.
Computer Name (4): Pull down the menu and all the computers
connected to the router will be listed here. You
can select the computer name without checking
the IP address of the computer.
Add (5): Click to add the public IP address and
associated private IP address to the DMZ table.
Reset (6): Click “Reset” to remove the value you entered
in the “Public IP” and “Client PC IP Address”
fields.
Current All existing public IP address and private IP
DMZ table (7): address mapping will be displayed here.
Delete (8): If you want to delete a specific DMZ entry,
check the “Select” box of the DMZ entry you
want to delete, then click “Delete Selected.”
(You can select more than one DMZ entry.)
Delete All (9): Click to delete all DMZ entries listed here.