User manual

85
I forget my login username and/or password.
STEPS
CORRECTIVE ACTION
1
If you have changed the password and have now forgotten it, you
will need to upload the default configuration file. This will erase all
custom configurations and restore all of the factory defaults,
including the password.
2
Press and hold in the Reset/WPS button for over five seconds,
then release it. When the Power LED begins to blink, the defaults
have been restored.
3
The default username is “admin.” The default password is “1234.”
The Password and Username fields are case-sensitive. Make
sure that you enter the correct password and username using the
proper case.
4
It is highly recommended that you change the default username
and password. Make sure you store the username and password
in a safe place.
I cannot access the Web Management of the router after activating the ACL
function.
STEPS
CORRECTIVE ACTION
1
When ACL is activated, you need to set the ACL rule for allowing
some users to use some services. Check if you have set the
rules. If not, all the users are forbidden to use any of service from
the LAN or WAN.
2
If you cannot access the Web management of the router, press
and hold in the Reset/WPS button over 5 seconds to restore to
defaults.
3
After the router has restarted, log in to the router with the default
IP address 192.168.2.1.