User manual

74
5.2.7.6 ACL Configuration
The Access Control List (ACL) is a list of permissions attached to the router that
specifies who is allowed to access this router. If ACL is enabled, all hosts cannot
access this router except for the hosts with an IP address in the ACL table.
Parameter
Description
ACL Capability
Enable or disable the ACL function.
Enable
Check to enable this ACL entry.
Interface
Select the interface domain: LAN or WAN.
IP Address
Enter the IP address that is allowed to access the router.
Subnet Mask
Enter the subnet mask that is allowed to access the router.
ACL Table
The ACL settings will be listed here. Click “Delete Selected” to
delete the settings you have selected. To remove all settings
from the table, click “Delete All.”
When you finish, click “Apply Changes.” You’ll see the following message
displayed on Web browser.