User manual

64
Click “Continue” to save the settings made and go back to the Web management
interface; click “Apply” to save the settings made and restart the router so the
settings will take effect after it reboots.
5.2.6.3 UPNP
When the UPnP function is enabled, the router can be detected by UPnP-
compliant systems such as Windows XP. The router will be displayed in the
Neighborhood of Windows XP, so you can directly double-click the router or
right- click the router and select “Invoke” to configure the router through a Web
browser.
Parameter
Description
UPnP
Enable or disable the UPnP feature.
WAN Interface
The upstream WAN interface is selected here. Select a
WAN interface that will use UPnP from the drop-down
menu.
When you finish, click “Apply Changes.” You’ll see the following message
displayed on Web browser.
Click “Continue” to save the settings made and go back to the Web management
interface; click “Apply” to save the settings made and restart the router so the
settings will take effect after it reboots.