User manual

Parameter

Description

Disable Wireless LAN

Interface

Check to deactivate the wireless function of the router.

When this is activated, the router will not be an access

point for other wireless clients to connect wirelessly.

Band

Select the radio band from one of the following options:

• 2.4GHz(B): only allows 802.11b wireless network

clients to connect to this router (maximum transfer rate

is 11 Mbps).

• 2.4 GHz (G): only allows 802.11g wireless network

clients to connect to this router (maximum transfer rate

is 54 Mbps).

• 2.4 GHz (B+G): only allows 802.11b and 802.11g

wireless network clients to connect to this router

(maximum transfer rate is 11 Mbps for 802.11b clients;

54 Mbps for 802.11g clients).

• 2.4 GHz (N): only allows 802.11n wireless network

clients to connect to this router (maximum transfer rate

is 150 Mbps).

• 2.4 GHz (G+N): only allows 802.11g and 802.11n

wireless network clients to connect to this router

(maximum transfer rate is 54 Mbps for 802.11g clients;

150 Mbps for 802.11n clients).

• 2.4 GHz (B+G+N): allows 802.11b, 802.11g and

802.11n wireless network clients to connect to this

router (maximum transfer rate is 11 Mbps for 802.11b

clients; 54 Mbps for 802.11g clients; 150 Mbps for

802.11n clients).

Mode

Set the router to act in AP, Client or WDS mode.

SSID

The SSID (up to 32 printable ASCII characters) is the

unique name identified in a WLAN. The ID prevents the

unintentional merging of two co-located WLANs. The

default SSID of the router is “default.”

Channel Width

Sets the channel width of the wireless radio. Do not

modify the default value if you don’t know what it is. The

default setting is “Auto 20/40 MHz.”