User manual

9
HARDWARE INSTALLATION
Antennas (partially shown): For optimal results in transmitting the
wireless signal, it’s usually best to keep both antennas perpendicular
 totheoor.
HDMI: This audio/video output connects to any HDMI-compatible display.
VGA: This D-sub 15-pin video output connects to any VGA-compatible
display.
Audio Out: This stereo port connects to external speakers or an audio
 amplier.
USB: This can be used to connect a wired or wireless mouse.
LAN: This 10/100Mbps Fast Ethernet port connects to your local area
network.
2.3 bottom PaNel
Wallmount holes: Use these to hang the device on a wall. NOTE: If the
 deviceistobeplacedandoperatedonahorizontalsurface,consider
placing the included foot pads on the bottom panel.
MAC address label: This is information you may need during software
 installationandconguration.
Product label:Thisiswhereyou’llndthedevice’smodelnameand
serial number — useful when you request assistance.
2.4 remote coNtrol
Black out: Press this button to activate the Blackout
function, which removes contents on any external
display. Press again to resume.
Menu: Press this button to switch the display output
of the Wireless Projector Server between the
presenter’s computer display content and the
 device’scongurationmenu.
Page up: Equivalent to Left key on your computer
keyboard.
Page down: Equivalent to Right key on your
computer keyboard.
Prev.: Press to select the previous user (presenter)