User manual

44
CONFIGURATION
Click“Browse…”toselectarmwarelefromyourcomputer,thenclick
“Apply” to start the upgrade. The procedure may require some time, so
be patient and don’t switch your computer or the projector server off
during the process. Nor should you remove the network connection
duringarmwareupgrade:Iftheupgradefails,theprojectorservermay
not be able to function properly.
5.9.3 reset
Should the Wireless Projector Server not function properly, or if it responds
to commands slowly, rebooting it may solve the problem.
Click ‘“Apply” to reboot
the projector server. You’ll
be prompted before the
projector server reboots:
Click “OK” to reboot or
“Cancel” to abort. The
projector server needs
about a minute to reboot
(before you attempt to
reconnect).