User manual

43
CONFIGURATION
5.9.1 coNfiG tools
Youcanbackupandrestorethecongurationofthisprojectorserver,
and you can restore all settings back to factory default values.
Backup Settings: Click “Save…” to capture the projector server’s current
 settingsasaletostoreonyourcomputer.Whenprompted,selecta
 folderonyourcomputertodirectthele.Considerdifferentnamesfor
 multiplecongurationlessoyourememberthepurposeofeachle.
Restore Settings:Click“Browse…”toselectacongurationlestored
 inyourcomputer’sfolder(you’llbepromptedtoselectale).Click
 “Upload”touploadthecongurationletotheprojectorserver.
Reset: Click to reset all settings of the projector server back to factory
 defaultsettings.You’llbepromptedtoconrmthecongurationreset.
5.9.2 firmWare
Clicktoupgradethermwareofthisprojectorserver.Newrmwarewill
provide more functionality and is made available should a problem be
discoveredthatrequiresax.WhentherstFirmwareUpgradescreen
displays, click “Next” to continue to the subsequent screen (below) and
beginthermwareupgradeprocedure.