User manual
41
CONFIGURATION
projector server. You’ll be prompted before the projector server is
rebooted, and you can cancel rebooting.
Action: Click (Play/Start) on the remote control and the selected user
becomes the active presenter.
IP Address: Displays the IP address of this user.
Status: Displays the status of this user.
Connection Time: Displays the total elapsed time since a connection
was established with this user.
5.7 disPlay settiNGs
Clickthisoptiontocongurethecharacteristicsoftheexternaldisplay.
Output Mode: Select which video output interface the projector server
should use: “VGA” or “HDMI.”
Resolution: Select the output video resolution from the drop-down menu.
Select “Auto” to allow the projector server to determine the setting
based on the information provided by the external display. NOTE: Not
every display device supports this function. Also, when “HDMI” is
selected as the output mode, the resolution cannot be changed.
Click “Apply” (see Section 5.3).
4